AgeVolt services

From design to working charging.

From your first home charger to an entire car park. We prepare the design and project, help with permits, installation and commissioning. Servicing and training make everyday use easier.

Choose one service or a complete turnkey solution. If you have your own installer, we help with preparation and commissioning. Start with a free remote assessment.

SmartBase cross-section with prepared supply cabling
Good charging starts with preparing the site.SmartBase · foundation and supply for a charging station
DesignInstallationCare

Let's start with your site

First, we assess what makes sense.

Tell us where you want charging and who it is for. We propose devices, the required work and a budget.

Remote assessment

Free of charge

Using your information and cooperation, we assess the site remotely and prepare a quotation. Both the assessment and quotation are free.

I want a solution proposal

On-site survey

€150 including VAT

At your request, we assess the site in person. The fixed €150 fee includes up to one hour on site and travel anywhere in Slovakia. The quotation is free.

If you confirm your installation order within 6 months of the site visit, we deduct the full €150 fee.

Arrange a site survey
How precise will the quotation be?

We give a fixed hardware price for the agreed scope. For simple installations, we can also determine the installation price after either an online or on-site survey. For larger jobs, we prepare an estimate and refine it based on the design and bill of quantities. The offer always identifies fixed prices and estimates.

If you cannot provide the necessary information or take part in an online assessment and request an in-person visit, we offer a site visit for a fixed €150 incl. VAT, normally paid in advance. This includes up to one hour on site and travel throughout Slovakia, with no additional hourly or mileage charge. The quotation remains free.

If you confirm your installation order within six months of the site visit, we deduct the full €150 fee. Otherwise, the site visit remains a paid service. We agree visits requested by us and exceptions for tenders individually. A site visit already included in a project package is not charged again.

Design and permitting

From your idea to installation documentation.

We prepare documentation and a bill of quantities for pricing the work. We choose the design scope and required process based on your site.

Charging design documentation

Smaller outdoor solutions

Design and building notification

€611 including VAT

A package for one or more stations with a total power up to 22 kW where the building notification procedure is appropriate.

  • Site survey and construction design
  • Building notification, communication with the authority and administrative fee
  • Bill of quantities for pricing the installation
View package scope

More complex sites

Larger projects

€1,970 including VAT

For larger car parks, garages and solutions requiring more extensive preparation.

  • Construction, electrical and fire safety designs
  • Coordination, permitting and bill of quantities
  • Occupancy approval and supporting documentation within the agreed scope

Total price according to the needs of a single project, up to €4,500 incl. VAT.

View package scope

These are design and permitting services. Chargers, materials and installation are priced separately.

Preparation, installation and commissioning

Your supplier or our turnkey solution.

We provide cabling, the required construction work, charger installation and commissioning. If you have your own electrician or installation company, we help them prepare and connect our solution.

Support for your own installation

We can also connect compatible chargers from other brands to MyAgeVolt. We assess the options based on the specific model.

In MyAgeVolt you get unified station management, reports and integrations with business systems. The AI assistant helps you work with data and settings.

Configuration, initial commissioning and initial training for the purchased product are included in its price. On-site installation is agreed according to the scope.

EVC2 home package for €1,400 incl. VAT already includes wall mounting, a new electrical supply cable of up to 5 m along an accessible route, protective devices, an initial inspection and delivery throughout Slovakia. Work already included in the package is not charged again.

Discuss the installation scope →
GarageBase with a continuous supply cable and a branch to the charger
There is a solution for cable preparation too.GarageBase · charger connection branch in a garage
Explore installation accessories →

Indicative rates

So you know what to expect.

We agree the specific scope and price in the offer. These basic rates apply to standalone work.

Installation and routine work

€40 / hour including VAT

Electrician, installation technician, routine servicing and standard settings.

Per worker.

Specialist work

€80 / hour including VAT

Design, electrical inspections, advanced diagnostics, integrations and programming.

Per specialist.

Shipping

€25 / 100 km including VAT

Car or small van. Each worker's travel time is charged in addition to transport.

Vehicle base rate: €0.25/km. The quote also includes the required technicians' travel time in the travel charge.

How do we charge for time and travel?

A worker's time includes travel and work at your site. The minimum is one hour, followed by each started half-hour of their total time. Travel time is included in the travel charge and is not charged again as on-site work.

Your quote includes one travel charge covering the vehicle and the required technicians' travel time, based on the route and team size. Vehicle mileage is not multiplied by the number of passengers. Work and travel included in a package are not charged again. The €150 site survey includes travel and the technician's time.

Servicing and maintenance

Help when you need it.

Charging not working? Our telephone helpdesk is available 24/7. We resolve many problems remotely. If an on-site repair is needed, we arrange a service visit.

Service contact and helpdesk

Charging faults · 24/7Helpdesk contactsHelpdesk contacts

We handle routine settings and configuration during working hours, 9:00–16:00.

Servicing and repairs

We help with warranty and post-warranty servicing. Our aim is to resolve a fault within 14 days.

Rapid call-out with an SLA

We can contractually agree a technician's arrival within four hours, 24/7 throughout Slovakia. Monthly fees and urgent call-outs are priced individually.

Regular maintenance

We agree checks, maintenance and electrical inspections according to your devices and operation.

How does an on-site repair work?

For a supply that includes installation, we handle on-site warranty repairs within the agreed scope. When purchasing hardware separately, you can send it for servicing or arrange a paid call-out. Post-warranty repairs are priced as needed.

We aim to complete repairs on the first visit. Timing depends on the fault, required parts and repair approval. An SLA for arrival within four hours is a separately agreed service and does not mean the repair will be completed within that time.

Consultancy and training

So you know what to do and how.

Initial training for the purchased product is included in the price. If you need to train more people or cover topics in greater depth, we prepare training for your needs.

Design

Design it well

Hardware, cabling and suitable solution selection. Documentation for designing and pricing the project.

Installation

Install it correctly

Connection, commissioning and servicing for installation and service technicians.

Operation

Use it comfortably

MyAgeVolt configuration, charging management and everyday operation for your employees or users.

Additional training

€40 / trainer hour including VAT

The price covers the whole group and is not multiplied by the number of participants. Online, at our Bratislava premises or at your site. For visits, transport and travel time are charged at the listed rates.

We adapt the scope to the topic. Broader training in one area usually takes one day; focused training can be shorter.

Arrange training

For partners

Deliver solutions to your customers.

Are you a designer, electrician or installation company? We train you in designing, installing and operating AgeVolt solutions so you can provide these services to your own clients.

We help with project preparation and technical questions. The cooperation and service scope are agreed for each project.

I want to cooperate

Tell us about your plans

We will prepare a quote for you

Tell us where you want charging and what you need help with. If you do not yet know the exact scope, we will review it together.

We will use your details to handle your enquiry. Privacy policy.

Your request has been received for processing.

The request could not be accepted. Please try again or use our contact details.

You can also contact our sales team. For a charging fault, call the helpdesk.