Slovak version:
- Fixed reconnection on TR after switching from DHCP to a static IP
- Fixed the display of the current IP after a DHCP change
- Fixed reading OCPP messages shorter than 11 characters
- Fixed stations connected through OCPP, such as DC stations, remaining in EMS with a power allocation despite being available and drawing 0 kW
- Stopped sending vendor error code in StatusNotification
- Option to upload a Transactions.csv file through the Logs page
- Consumption is shown to two decimal places when power is 0 kW
- For MQTT, reduced kW transmission to once per second and temperature transmission to once every 10 seconds
- CIB device firmware updates immediately after the programme update
- Adjusted MQTT message timing to reduce traffic
-
Reduced the OKTE query interval to one hour
English version:
- Repair of reconet on TR after switching from DHCP to static IP
- Fix displaying current IP for DHCP after its change
- Fix reading from OCPP message shorter than 11 characters
- Fix if NS via OCPP (e.g., DC) stayed in EMS with power, even if it was free, and power was really 0 kW
- Removed sending vendor error code in StatusNotification
- Added option to upload Transactions.csv file via Logs page
- At 0 kW power, consumption displays with 2 decimal places
- For MQTT, slowed kW sending to 1xSec and temp to 1x10sec
- Update FW of CIB devices immediately after program update
- MQTT message timing adjusted to reduce traffic
-
Reduced OKTE request time to 1 hour
Turkish:
- Repair of reconet on TR after switching from DHCP to static IP
- Fix displaying current IP for DHCP after its change
- Fix reading from OCPP message shorter than 11 characters
- Fix if NS via OCPP (e.g., DC) stayed in EMS with power, even if it was free, and power was really 0 kW
- Removed sending vendor error code in StatusNotification
- Added option to upload Transactions.csv file via Logs page
- At 0 kW power, consumption displays with 2 decimal places
- For MQTT, slowed kW sending to 1xSec and temp to 1x10sec
- Update FW of CIB devices immediately after program update
- MQTT message timing adjusted to reduce traffic
- Reduced OKTE request time to 1 hour
V3 v_.1.2.0 release 27.7.2024
Slovak:
- Fixes to EMS Eco modes.
- Added the option to switch between Eco and Comfort during charging by tapping an RFID card against the charger.
- Active Eco mode is indicated in purple instead of the usual blue during charging.
- Added MQTT publisher support for sending real-time data to an MQTT broker.
- The last charging session is saved and displayed using the right arrow when no charging session is active.
- Shows a backend offline message when checking monthly card consumption while the backend is unavailable.
- Prevented repeated writing of OCPP connection errors.
English:
- Fixes to EMS eco modes.
- Added the option to switch between Eco and Comfort during charging by tapping the RFID card to the charger.
- Color indication of active Eco mode with purple, instead of the usual blue during charging.
- Added support for MQTT publisher to send realtime data to MQTT broker.
- Saving and displaying the last charging on the connector with a right arrow when no charging is active.
- Display message that backend is offline when checking monthly consumption on the card and backend is unavailable.
- Blocked cyclic writing of connection errors to OCPP.
Turkish:
- Fixes to EMS eco modes.
- Added the option to switch between Eco and Comfort during charging by tapping the RFID card to the charger.
- Color indication of active Eco mode with purple, instead of the usual blue during charging.
- Added support for MQTT publisher to send realtime data to MQTT broker.
- Saving and displaying the last charging on the connector with a right arrow when no charging is active.
- Display message that backend is offline when checking monthly consumption on the card and backend is unavailable.
- Blocked cyclic writing of connection errors to OCPP.
V3 v_.1.1.9 release 2.6.2024
- -updated start charging for Renault Zoe
V3 v_.1.1.9 release 2.6.2024
- -updated start charging for Renault Zoe
V3 v_.1.1.8 release 1.6.2024
Slovak:
- Fixed update email subjects and formatting; full stops were replaced by commas.
- Integrated the option to start charging by presenting a QR ticket from the Triton parking system. The ticket can be scanned by the built-in QR reader or a mobile application through OCPP 1.6.
- Direct payment for charging through the parking system.
- Uses the default IP address 18.184.22.118 if the DNS server cannot resolve api.agevolt.com.
- Adjusted the cost centre tariff display for easier navigation.
- Fixed sending transaction data to the OCPP backend.
- Added EMS logs to monitor charging power, with data saved every 15 minutes.
- Changed charging loop initialisation to improve resilience to RCBO faults.
English:
- Updated email subject and formatting; periods were replaced with commas.
- Integration of charging initiation by scanning a QR ticket from the Triton parking system. QR can be scanned using an embedded reader or via mobile app through OCPP 1.6.
- Direct payment process for charging in the parking system.
- Default IP address 18.184.22.118 used if api.agevolt.com cannot be resolved on DNS server.
- Adjusted display of Low and High tariff in cost centre for clarity.
- Correction in transaction forwarding to OCPP backend.
- Addition of EMS logs for monitoring charging power and regular data saving every 15 minutes.
- Improved charging loop initiation for better fault tolerance against RCBO errors.
Turkish:
- Updated email subject and formatting; periods were replaced with commas.
- Integration of charging initiation by scanning a QR ticket from the Triton parking system. QR can be scanned using an embedded reader or via mobile app through OCPP 1.6.
- Direct payment process for charging in the parking system.
- Default IP address 18.184.22.118 used if api.agevolt.com cannot be resolved on DNS server.
- Adjusted display of Low and High tariff in cost centre for clarity.
- Correction in transaction forwarding to OCPP backend.
- Addition of EMS logs for monitoring charging power and regular data saving every 15 minutes.
- Improved charging loop initiation for better fault tolerance against RCBO errors.
V3 v_.1.1.7 release 12.5.2024
SK
1.1.7
-adding user and admin for web to the backup to prevent them from reverting to default after updateprog, deletion of operator role
-fixing the display of price according to settings on my.agevolt.com or according to settings in the local user
-email notification sent to Owner + CPO Email after update to new version with revision history and info on where to find all previous changes.
EN
1.1.7
-adding user and admin for web to the backup to prevent them from reverting to default after updateprog, deletion of operator role
-fixing the display of price according to settings on my.agevolt.com or according to settings in the local user
-email notification sent to Owner + CPO Email after update to new version with revision history and info on where to find all previous changes.
TR:
1.1.7
-adding user and admin for web to the backup to prevent them from reverting to default after updateprog, deletion of operator role
-fixing the display of price according to settings on my.agevolt.com or according to settings in the local user
-email notification sent to Owner + CPO Email after update to new version with revision history and info on where to find all previous changes.
V3 v_.1.1.6 release 5.5.2024
- Resent April reports to recipients who had not received them
- Fixed UserName for users imported from a file
- Improved EMS Eco modes to prevent selecting an invalid combination
- When charging starts, State alternates with the Price=XYeur message. The price is obtained from OCPP for OCPP-authorised transactions with a non-zero price; applies only to Lang=SK
V3 v_.1.1.5 release 20.4.2024
- Various fixes for associating multiple EMS instances with the same EVSE (charging connector): This update improves cooperation between multiple energy management systems and one EVSE.
- Flexible EVSE control during charging: An RFID card can now take the charging connector out of Eco mode during charging, activating Run Comfort for that transaction.
- In active Eco mode, the LEDs show a combination of blue and green rather than blue alone, making Eco and Comfort modes visually distinct.
- Added notifications for stations integrated with SmartSystem through OCPP, particularly DC stations. They receive the same WhatsApp, Viber and SMS notification support after charging ends as internal AC stations.
- Fixed notifications containing incorrect data, including zero power or a missing user name.
- Improved the SmartSystem web application's response on EVSE and EMS pages: Fixed number entry issues that sometimes required entering a number several times before it was recorded correctly.
- Option to change the EVSE chart type: Users can now switch between Line and Bar charts for clearer data visualisation.